Pranav Plastic Products

Fine Bubble Aeration Tube is a fine bubble diffuser designed for low pressure operation with high flow, rherey reducing the cost of power required to aerate.

High efficiency aeration tube of size 12.5 mm x 25 mm (0.5" x 1") seen but its characteristic blue line. This is the most popular product and as per international specifications

High Flow Aeration Tube- Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 800 ltrs/ hour (0.8 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air.

High Flow Aeration Tube- Depends on blower size and output. At 2 PSI pressure and 1 mtr water head, Average flow rate per mtr is approximately 800 ltrs/ hour (0.8 m3 / hr). However since bursting is not a concern, the air flow can increase as high as required by increasing blower and motor size. This is not however useful for aeration purpose since the flow will be too high to have any meaningful dissolution of air.

High Airflow large size tube of size 1" x 1.5" - extremely high air flow with double the inside diameter, 4 times the flow area and 50% more circumference, to get small bubble size and very high aeration and efficiency.

The water Testing Kit is compact, portable, user friendly, accurate and instant results.

Depending on its application, it can test for various parameters.

Floating Surface Aerators  It is a powerful jet aerator, available in 3 HP and 5 HP models, where the motor remains inside the water and it sucks in air from the surface.The resulting vacuum pushes in the air and water mixture out at a depth of half a meter, thus providing additional aeration.